CONTAC NO OFFICE 021-2273.7666
MOBILE :
- TELKOMSEL : 0822-600--88165 (WA) / 0812-853--90966
DEMOLITION - CONCRETE BREAKER - PNEUMATIC BREAKER
MERK - TYPE : TOPAC T 275
| Weight | 30 Kg |
| Ø Piston | 50 mm |
| Stroke | 150 mm |
| Impact | 1.180 /min |
| Comsumption | 1800 L/min |
| Chuck for Shank | Hex. 32 x 152 |
| Air Hose | 19 mm / 3/4 inch |
| ACESORIES INCLOUDING | CHISEL (MOIL POINT, FLAT, DIGGER) - AIR HOSE - TROLLEY |
PRODUCT DEFINITIONS
Pneumatic Tool Concrete Breaker / concrete machine which is also known as a pneumatic drill or pneumatic hammer drill that uses compressed air as a power source. Air supply usually comes from a portable air compressor is driven by a diesel engine. Reciprocating compressors previously used. The unit comprises a reciprocating compressor is driven, via a centrifugal clutch, with a diesel engine. Jack Hammer Pneumatic provided only two speeds: Standard, when it slipped and maximum clutch, when the clutch is engaged and the compressor is running. Pneumatic Concrete Topac Breaker is mainly conceived to surpass the performance for every job with handling more than size ensures an excellent subject and comfort management. Design based on where the air - exclusive characteristics - reduces worker fatigue. to repair the valve to increase the air force, applied by a piston which is very strong, with an increase in productivity due to the special design of the four screws, highly resistant to tension gouging. Thanks to the reduced number of pieces, spare parts consumption is very low. It is advisable to clean the hammer add oil mixed with gasoil (30% - 70%) regularly over a piece n º 1132 (Racord sign)
.