REBAR CUTTER & REBAR BENDER HIRANO TAKEDA
MADE IN JAPAN
CAPACITY : MAX DIAMETER 32 MM
TECHNICAL DATA & SPECIFICATION
REBAR BENDING MACHINE STRUCTURE STEEL
MERK - TYPE : HIRANO TAKEDA SB 42
- Maximum bending full: 32mm
- Motor: 2.2 kW
- Dimension: 920 x 1070 mm 990
- Weight: 720 kgs
REBAR CUTTER MACHINE STRUCTURE STEEL
HIRANO TAKEDA BC 42A
- Maximum cutting full: 32mm
- Motor: 2.2 kW
- Dimension: 1140 x 500 x 830 mm
- Weight: 720 kgs
PRODUCT DEFINITIONS
BAR CUTTER namely steel cutlery reinforcement of the desired size. In this project used an electric Cutter Bar. The advantage of electric cutter bar compared BAR CUTTER BAR CUTTER electricity user is able to
cut steel reinforcement with a large diameter and the steel quality is quite high, and also it can shorten the processing time. Machine Bar Cutter (Cut Iron Ulir) machines are used to cut the iron (cutter bar).
As for the smaller-diameter steel, the cutting can be done several pieces at once according to the capacity of the tool.
BAR BENDER is a tool used to bend the iron / steel reinforcement in a variety of angles in accordance with the plan. The way the device works is the steel to be bent is inserted between the shaft and the shaft
bending press then set the angle according to the desired angle and long bent pembengkokkannya. The tip reinforcement in bending the shaft is held by key bending. Then pedal is pressed so that the wheels
will rotate in accordance with the bending and bending angle desired. Bar bender can adjust the angle of bending reinforcement easily and neatly with mengantur degree bend.
Barbender much in use as a tool of civil construction or manufacturing pembesian in construction or manufacturing precast in the construction of roads, buildings, bridges to small-scale or high buildings.
Process of manufacturing pembesian be quicker to use this tool as a time on each bending only takes 3-5 seconds to produce 1- 4 iron rods bend / in pieces
