TYPE: BAR BENDER STRONG BB 42
- Engine Dimensions (mm): 870 x 940 x 900
- Bending Capacity: 32 mm in diameter
- Elektromotor: 3 HP
- Phasa: 3 Phases
- Central Roller Diameter (mm): 73-84-98-128-148
- Weight: 557 Kg
BAR CUTTER BC 42
- Engine Dimensions (mm): 1100 x 660 x 550
- Cutting Capacity: 32 mm
- Elektromotor: 3 HP
- Phasa: 3 Phases
- Weight (Kg): 541
PRODUCT DEFINITION
Bar Bender is a machine tool used to bend steel reinforcement in a variety of angles according to the planning. The workings of this tool are steel to be bent inserted between the compressive axle and the bending axle and then adjusted angle according to the desired bent angle and the length of bending. The bending end on the bending axle is held with a bending key. Then the pedal is pressed so that the bending wheel will rotate according to the desired angle and bend. The bender bar can adjust the bend angle easily and neatly.
BAR CUTTER is a cutting tool steel cutter according to the desired size. On this project used Electric Cutter. The advantage of the electric bar cutter versus the manual BAR CUTTER is that the electric BAR CUTTER can cut the reinforcing steel with a large diameter and with a high enough steel quality, besides it can also shorten the processing time. Bar Cutter Machine (Cut Screw Iron) Machine used to cut iron (Bar cutter). Engine capacity can operate for iron or concrete slabs Diameter 10 mm up to 43mm. Specifications / Brands in use TAKEDA / TOYO / ORIMAS, Etc. HOW TO WORK BAR CUTTER ie steel to be cut is inserted into Bar Cutter's tooth, then controller pedal rests, and within seconds of steel reinforcement will be cut. Cutting for reinforcing steel having large diameter is done one by one. As for the smaller diameter steel, cutting can be done several pieces at once in accordance with the capacity of the tool
