ELECTRIC CONCRETE VIBRATOR ENAR AFE 2500

Specification of ELECTRIC CONCRETE VIBRATOR ENAR AFE 2500

HIGH FREQUENCY COVERETER ENAR AFE 2500 T

•     Input: 380 V (3 phase) - 50 HZ
•     Power (Kw): 4
•     Current Output: 2.5 kVA / 35 A
•     Output voltage: 42 V (3-phase) - 200 HZ
•     Number of Outlets: 3

•     Weight: 34

  ---

  ENAR Shaft Internal Vibrators, type:

M 38 AFP = Head Ø 38 mm,

•     head length 369 mm,
•     rated current 8.0 A,
•     frequency of 200 Hz, 42 V
•     operating weight 12 kg

M 5 AFP = Head Ø 50 mm,

•     head length 363 mm,
•     rated current 12 A,
•     frequency of 200 Hz, 42 V
•     operating weight 14 kg

M 6 AFP = Head Ø 58 mm,

•     head length 430 mm,
•     rated current 14 A,
•     frequency of 200 Hz, 42 V
•     operating weight 16 kg

M 7 AFP = Head Ø 65 mm,

•     head length 395 mm,
•     rated current 22 A,
•     frequency of 200 Hz, 42 V
•     operating weight 18 kg

Made in Spain (Spain) - Europa

PRODUCT DEFINITIONS
Electric Concrete Vibrator is a tool used for compacting concrete / cast concrete vibrator machine applied to many foundry work, wall / column bridge casting / on construction of buildings or construction of roads and other civil works. Internal vibrators are designed in accordance with the standards in the industry (road machine) that aims to maximize productivity and performance. Internal vibrator has several types that are tailored to the needs of the project concerned.
Shaft Internal Vibrator is a hose that channel vibration and thermal energy so that the concrete material / quick-drying concrete and solid without cracks. Shaft Vibrator internal components of electric instruments driven by unit HIGH FREQUENCY CONVERTER 3 phase adapted to the capacity or the use of an electrical mechanism that is available.ELECTRIC CONCRETE VIBRATOR ie a vibration mechanism that provides a mechanical device for back and forth movement in all directions. A vibrator is a mechanical device to generate vibrations. This vibration is often generated by an electric motor with an unbalanced mass on its driveshaft.
Consolidated concrete vibrator freshly poured concrete so that any trapped air and excess water is released and settles firmly in place concrete in the formwork. improper consolidation of concrete can cause product defects, compromise the strength of the concrete, and produce surface stains such as bug holes and honeycomb. An internal concrete vibrators steel cylinder about the size of the handle of a baseball bat, with a hose or power cord attached to one end. Vibrator head sink into wet concreteFEATURES High Frequency Converter ENAR

• High frequency converter for concrete vibrators.

• Converter with permanent magnets.

• Thermoswith standard magnetic to prevent short circuits and overheating.

• Absolutely watertight switch box ensemble.

• Trains strong steel for protection and transport converter.

• Connection cables and connectors in compliance with all EU standards.

• The equipment is designed to achieve the highest performance.

FEATURES Shaft Internal Vibrators ENAR

• High frequency concrete vibrator.

• The switch box, made of high-impact aluminum alloy, robust and watertight, completely ruling out the possibility of moisture ingress of cement.

• Switching is protected by rubber resistant to wear and tear of continuous use abrasive washing machine strengthened.

• Enar motor-in-chief pockers operates at a frequency of 12,000 vibrations VPM

• The broad range of ENAR vibrator can be used for all types of vibration operations.

• The frequency and amplitude they guarantee optimal compacting concrete without separation of elements make up the mass.

• Using ENAR, the result is concrete