BARCUTTER BARBENDER HIRANO TAKEDA

Specification of BARCUTTER BARBENDER HIRANO TAKEDA

REBAR CUTTER & REBAR BENDER HIRANO TAKEDA
MADE IN JAPAN
CAPACITY : MAX DIAMETER 32 MM

TECHNICAL DATA & SPECIFICATION

REBAR BENDING MACHINE STRUCTURE STEEL

MERK - TYPE : HIRANO TAKEDA SB 42

•     Maximum bending full: 32mm
•     Motor: 2.2 kW
•     Dimension: 920 x 1070 mm 990
•     Weight: 720 kgs

  ---

REBAR CUTTER MACHINE STRUCTURE STEEL

HIRANO TAKEDA BC 42A

•     Maximum cutting full: 32mm
•     Motor: 2.2 kW
•     Dimension: 1140 x 500 x 830 mm
•     Weight: 720 kgs

PRODUCT DEFINITIONS
BAR CUTTER namely steel cutlery reinforcement of the desired size. In this project used an electric Cutter Bar. The advantage of electric cutter bar compared BAR CUTTER BAR CUTTER electricity user is able to
 cut steel reinforcement with a large diameter and the steel quality is quite high, and also it can shorten the processing time. Machine Bar Cutter (Cut Iron Ulir) machines are used to cut the iron (cutter bar).
 The capacity of the machine can operate for rebar or a screw diameter of 10 mm s / d 43mm. Specifications / Brand in use TAKEDA / TOYO / ORIMAS, Etc. HOW THE BAR CUTTER namely the steel to be cut is inserted 
into the tooth Bar Cutter, then pedal is stepped controllers, and within seconds the reinforcing steel will be cut off. Cutting to the reinforcing steel that has a large diameter is done one by one. 
As for the smaller-diameter steel, the cutting can be done several pieces at once according to the capacity of the tool.BAR BENDER is a tool used to bend the iron / steel reinforcement in a variety of angles in accordance with the plan. The way the device works is the steel to be bent is inserted between the shaft and the shaft 
bending press then set the angle according to the desired angle and long bent pembengkokkannya. The tip reinforcement in bending the shaft is held by key bending. Then pedal is pressed so that the wheels 
will rotate in accordance with the bending and bending angle desired. Bar bender can adjust the angle of bending reinforcement easily and neatly with mengantur degree bend.Barbender much in use as a tool of civil construction or manufacturing pembesian in construction or manufacturing precast in the construction of roads, buildings, bridges to small-scale or high buildings.
Process of manufacturing pembesian be quicker to use this tool as a time on each bending only takes 3-5 seconds to produce 1- 4 iron rods bend / in pieces

MORE INFORMATION

EMAIL : ams.jkt001@gmail.com // ams.jkt01@yahoo.com

CONTAC US 021-2273.7666

• MOBILE : 0822-600--88165 ( WA ) / 0812-853--90966