Specification of BARCUTTER BARBENDER SECONDHAND RECONDITION

Bar Bender is a machine tool used to bend steel reinforcement type of iron screw or plain iron in various angles according to the planned sizeon the structure of a building according to precise size.. The way this tool works is that the bend is held by the key. Then the pedal is pressed so that the bending wheel will rotate according to the desired degree of bend. The bender bar can adjust the angle of the reinforcement easily and the size is precise.
Barbender tools are commonly operated by 1 operator who works at the same time bending and maintaining the machine every time. Barbender equipment can operate normally supported by 3 phase (380 V) electric power with power adjusting to the specifications of the product being used.

BAR CUTTER Is a type of reinforcing steel cutting tool for iron or plain iron according to the desired size / planned on the structure of a building according to the size of the precision.
Barcutter tool can operate normally supported by 3-phase electric power (380 V) with power adjusting to the specifications of the product being used.
The advantage of an electric bar cutter compared to a manual BAR CUTTER is that an electric BAR CUTTER can cut reinforcement bars with large diameters and with high enough steel quality,
besides that it can also shorten the processing time. Barcutter Machines Usually operated by 2 people who do manufacturing activities, 1 person operates the machine at the same time taking measurements
iron on the measuring table and 1 person doing assistance to lift the iron which is usually available iron is still in factory standard size so it requires enough energy

Barcutter and Barbender machine capacity can operate for concrete steel or threaded diameter 6 mm to 32 mm. The specific size for producing pieces and bending iron with sizes above 32 mm. that is by using a Type 50/52 machine which allows the machine to work for fabrication of iron up to 40 mm in diameter. For Barbender SPIRAL BARBENDER models have differences in ARM Bender and Rotary which allows this barbender to produce a degree of buckling. in the form of a Spiral Circle (PER Form) in accordance with the Diameter of the circumference that can be set. The size of the bend ring finger is produced in several Change rollers that can be adjusted as needed.
Barbal Spiral Is widely used in the production of pembesian at PRA concrete molding (Precast) manufacturing plants that use the results of this production is a form of reinforcing concrete in building structures
so that the iron and concrete that is produced is applied to the construction of an instant nature, especially in the manufacture of pillars, earth spikes to panel panels that the installation section requires fast production.

• TELKOMSEL : 0822-600--88165 (WA) / 0812-853--90966
• TRI 3 : 0896-763--91443 (WA)