Product Details :
AVAILABLE OF CONCRETE MIXER CONCRETE MACHINE WITH CAPACITY SIZE, TYPE AND BRAND :
MEREK : TIGER - TIGA BERLIAN - TIGON - HERCULES - AKS
A. CONCRETE MIXER 500 LITER ( 0.5 CUBE )
- TYPE MODEL: TIGER (ENGINE DISEL 8,5 HP - YANMAR / DONGFENG / SQUARE EQUATION)
- TYPE MODEL: THREE DILS (ENGINE DISEL 8,5 HP - YANMAR / DONGFENG / EQUIVALENT EQUIVALENTS)
- DIMENSIONS: 2300 X 1175 X 1520 mm
- GROSS DRUM VOLUME: 500 LITER
- HEAVY WEIGHT: 400 Kgs
- NOMINAL CAPACITY: 450 LITER
- DRUM SPEED: 24 - 25 RPM
- MID PULLEY: 10 "X 3", MAIN PULLEY: 17 "
- POWER: DISEL 8.5 HP / 2200 RPM
B. CONCRETE MIXER 350 LITER
- TYPE MODEL: TIGER (ENGINE DISCRETE 6.0 HP - YANMAR / DONGFENG / EQUIVALENT EQUIVALENTS)
- TYPE MODEL: THREE BERLIAN (ENGINE DISCRETE 6.0 HP - YANMAR / DONGFENG / EQUIVALENT EQUIVALENTS)
- DIMENSIONS: 2000 X 950 X 1330 mm
- GROSS DRUM VOLUME: 350 LITER
- HEAVY WEIGHT: 280 Kgs
- NOMINAL CAPACITY: 275 LITER
- DRUM SPEED: 25 - 32 RPM
- MAIN PULLEY: 20 "
- POWER: DISEL 6.0 HP / 2600 RPM
In addition to the Type / Brands listed above we are also available some Type / other brands with different capacity, among others:
Capacity and Power Engine / Electric Motor
- 225 LITER
- 200 LITER
- 125 LITER
- 60 LITER
PRODUCT DEFINITION
In the execution of concrete work has been widely used concrete stirring machine or "molen", with this machine the mixture will be mixed more evenly and more perfect. In addition to the results of good mortar turns more stirring speed and stir cost is cheaper than stirring with human labor.
1) Tube Stir: Stirring tube in the form of a cylindrical vessel with the bottom covered and the cone-shaped top layer is cut off. At the top of the cone there is a mouthpiece of stirring tubes to insert concrete stirrer materials and to spill concrete after it is mixed. Inside the tube stir there are leaves that help mix the ingredients.2) Motor: Motion motors placed on the skeleton of the stirring machine are useful for moving the jar stir until the stirring tube can rotate.3) Mixer Wheel: to easily move the molen4) Framework: It is the body of a machine equipped with wheels and pull rods of the engine until the machine can be easily moved.5) Cylinder Inverting Wheel: The inverting wheel is useful for changing the position of the stirring tube when the materials are filled and when to spill the mix.6) Drag Machine: to facilitate the transfer of molen.7) Inverting Wheel Lock: This key is useful for locking the inverting wheel of the stirring tube so that it can be moved elsewhere. If the machine is not used for pulling, the rod can be inserted into the engine frame, and when it will be used to pull it the stem is removed / lengthened.
Machine maintenance
After the machine is finished the machine is cleaned with water until the remnants of mortar attached to the machine are lost.
The machine is dried until it is completely dry, free of water (not wet).
Smeared with oil (oil), especially rotating parts, such as axle / axle, tube teeth or inverting wheel gears so as not to rust.
Then stored in a place protected from rain, if necessary pen
